Category: Uncategorized

A circular loop of diameter 10 cm, carrying a current of 0.20 A, is placed inside a magnetic field = 0.30 T . The normal to the loop is parallel to a unit vector = -0.60 – 0.80 . Calculate the magnitude of the torque on the loop due to the magnetic field.

A rigid rectangular loop, which measures 0.30 m by 0.40 m, carries a current of 5.5 A, as shown in the figure. A uniform external magnetic field of magnitude 2.9 T in the negative x direction is present. Segment CD is in the xz-plane and forms a 35° angle with the z-axis, as shown. Find the magnitude of the external torque needed to keep the loop in static equilibrium.

What would be the expected radius of a nucleus having 82 protons and 125 neutrons?

If a current of 2.4 A is flowing in a cylindrical wire of diameter 2.0 mm, what is the average current density in this wire?

When a neutron (n) collides with a uranium-235 nucleus it can induce a variety of fission reactions. One such reaction is U + n → Xe + Sr + 2n. How much energy is released in this reaction, given the following mass values: Xe: 139.921620 u Sr : 93.915367 u U: 235.043924 u n: 1.008665 u (1 u = 931.494 MeV/c2)

A planar electromagnetic wave is propagating in the +x direction. At a certain point P and at a given instant, the electric field of the wave is given by = (0.082 V/m) . What is the magnetic vector of the wave at the point P at that instant? (c = 3.0 × 108 m/s)

A closed, circular loop has a counter-clockwise current flowing through it as viewed by a person on the right, as shown in the figure. If a second closed circular loop with the same radius approaches this loop with constant velocity along a common axis as shown, in what direction will a current flow in the approaching loop as viewed by the person on the right?

A Nichrome wire is used as a heating element in a toaster. From the moment the toaster is first turned on to the moment the wire reaches it maximum temperature, the current in the wire drops by 20.0% from its initial value. What is the temperature change in the wire? The temperature coefficient of resistivity for Nichrome is 0.000400 (°C)-1.

A multiloop circuit is shown in the figure. Some circuit quantities are not labeled. It is not necessary to solve the entire circuit. The current I1 is closest to

A galvanometer G has an internal resistance rg. A VOLTMETER is constructed by incorporating the galvanometer and an additional resistance Rs. Which one of the figures below is the most appropriate circuit diagram for the voltmeter?